Maxlink Reverse POE Switch description
PSBT-6-4P-250 is a 6 port 10/100Mbps PoE switch without management. Automatically detects and powers devices supporting PoE standard 802.3af/at (max. 30 W/port) on ports 1 to 4, on port 1 even supports PoE standard 802.3bt (60 W). Ports 5 and 6 serve as uplinks and do not support PoE. The total budget for powering the connected devices is 65 W using the external 52V/1.25A power adapter included in the package. The switch automatically balances the power for individual ports according to the consumption of the device. The switch can be fixed to the wall.
Port 1 additionally supports the 802.3bt standard, where the output power of up to 60 W is available for the connected device! The switches are now also equipped with a function Watchdog. If the Ethernet link is not detected for about 1 minute and the power supply is active at the same time, the supply voltage will be interrupted and the connected device will be restarted.
Switch has a manual mode switch
- Normal “N”: The switch powers the device at a distance of max. 100 m. The throughput of the switch per port is 10/100 Mbps.
- VLAN: Ports are logically separated from each other, in this mode unwanted broadcast storms can be avoided. The switch powers devices up to 100 m and the throughput per port is 10/100Mbps.
- 250 m: The switch powers devices up to 250 m with a reduced throughput of 10 Mbps per port.
- Power adapter 52 V; 1.25 A
- Power cord
Be the first to review “MaxLink PSBT-6-4P-250, 6Port Reverse PoE switch”