Reverse manageable PoE switch MaxLink has 8 ethernet ports 10/100/1000 Mbps from which 7 ports are allowing PoE-In. The last 8th port is supporting PoE-Out for powering the antenna.
7x PoE-In, 1x PoE-Out
Ports 1-7 are supporting PoE-In, port 8 is supporting PoE-Out. The switch only accepts passive 24 – 48V PoE on the input PoE ports. The output power is same as the input power. On the front side, there is also a 5V/12V DC output via a standard 5.5/2.1mm DC connector with the option of selecting voltage using a switch on the back side. It is possible to connect various input voltages to the PoE-In ports, the highest of them is always presented at the output.
The switch is equipped with its own management. In this management you can, for example, set up the parameters of IP, configure VLAN network or any other very useful L2 things functions.
The package does not include power supply nor PoE injector!
- The unit itself
- DC connecting cable with male jack ends